SAE Mark Nine, Mark 1X, Preamplifier Equalizer Very Good Condition.

Description

SAE Mark Nine, Mark 1X, Preamp, Very Good Working Condition.. Condition is "Used".
Unit has been unused long time, so before plug it in took it to local tech and tested everything,
After serviced unit plying good and sound petty sweet.
Only one small issue one equalizer pots when you move up little rough but working perfectly, when you move down it’s smooth. Other then that everything working excellent.
Some small scratches but nothing noticeable scratches, overall very good cosmetic condition.
SAE Mark Nine Preamplifier Equalizer
The SAE Mark IX offers the features and flexibility of an equalizer and a preamplifier control center. Professional-type slide pots and push-buttons are utilized instead of the conventional rotary-type controls. The Mark Nine's operational characteristics are much like those used in recording studios. The equalizers may be used to compensate for porly equalized records, modify the tonal characteristics of loudspeakers, and in some instances be used to compensate for room characteristics.
Unique Features
Professional-type equalizer utilizing five frequencies instead of conventional tone controls.
Ten torroidal LC bandpass filters with 12 dB/octave slopes.
Specially designed slide controls assure the industry's most accurate tracking. Equalizer and balance controls feature a center detent position.
Exclusive tape-copy facility.
Program and mode selections are made with push-buttons.
Equalizers have dual range: variable to ±16 dB or ±8 dB.
An equalizer defeat switch to electrically remove the equalizers from the circuit.
Specifiactions
Equalizer Control Range: ±16 dB or ±8 dB at 80 Hz, 320 Hz, 1280 Hz, 5 kHz and 15 kHz
Frequancy Response:
High Level Inputs : 10 Hz to 100 kHz ±0,25 dB
Low Level Inputs : 20 Hz to 20 kHz ±1 dB
Harmonic Distortion RMS: Guaranteed less than 0,02% for any audio frequency (20Hz -20kHz) at rated output (2,5 volts output)
Typical performance .01% at the residual level of our test equipment (Generator: Hewlett Packard H-20-200CD; Distortion Analyzer: Hewlett Packard 333A)
Intermodulation Distortion (60 Hz and 7 kHz 4/1 - 60 Hz and 12 kHz 4/1 - 60 Hz and 2 kHz 4/1):
Guaranteed less than 0,02% at arated output.
Typical performance .01% at the residual level of our test equipment (IM Analyzer used is Audio Instrument Co. No. 168A)
Signal-to-Noise Level:
High Level : 90 dB below rated output
Low Level : 75 dB below a 10 mV input
Gain:
Phono : 62 dB at 1000 Hz
High Level : 20 dB
Maximum Outptut: 18 volts into high impedance
Impedances:
Phono : 47 k Ω
High Level : 100 k Ω
Output : 600 Ω
Dimensions (W x D x H): 17" x 7" x 7-3/4"
Thanks for watching