Lee 2 Cav Mold 500 S&W Magnum + Sizing and Lube Kit!! #90991

Description

2-Cavity Bullet Mold &
Bullet Lube and Size Kit
500 S&W Magnum
(501 Diameter)
440 Grain
Flat Nose Gas Check
90991+ 90191
+90177
New
90991
C501-440-RF
Lee 2
-Cavity Bullet Molds
are a great choice for reloaders
looking for a quality mold at an affordable price.
Lee
machines their
mold blocks from aluminum making them rust resistant.
Aluminum molds heat up and cool down faster than iron
or steel molds and good bullets can usually be produced only after
a few casts. In addition, aluminum blocks are one-third the
weight of iron or steel mold blocks offering the bullet
caster less fatigue during extended casting sessions.
To ensure the best possible bullets, mold block halves are
CNC machined for unmatched roundness and size control.
Weights given are Lee's weights with suggested alloy; actual
weight may vary due to the alloy mixture used.
Material:
Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
Features:
Tangential cut off which helps to eliminate the nip at the sprue cut off.
Includes:
Hardwood Handles
Cavities:
2
90191
The Lee Lube and Size Kit is one of
the fastest and
easiest ways to lubricate and size cast bullets
. The sizing
die that comes with the kit
fits in any press that
accepts standard 7/8"-14 threaded dies
.
Bullets are
pushed through the sizing die nose first
,
so
no special top punches are needed
.
Gas checks are automatically seated and crimped in place
.
Sized bullets are captured in the special container
and a 4 oz bottle of Lee Liquid Alox bullet lube is included.
Material:
Steel Sizing Die, Plastic Hopper
Function:
Size cast bullets
Notes:
Comes in red plastic case.
Lee recommends bullets be relubed after sizing to be sure
the sized portion is coated with Alox. All lead bullets must be
lubricated, but it is not absolutely necessary to size all cast bullets.
Bullets must be sized if they are so large that they
expand the case too much to freely enter the gun's chamber.
Sizing sometimes helps accuracy by making the bullet uniform in diameter.
Sizing helps ensure uniform start pressure and
better
accuracy.
Gas checks can be installed with this tool.
Simply place the gas check on the base of the bullet before sizing.
+
90177
Alox Bullt Lube
4 oz Liquid
Lee Liquid Alox Lube coats the entire bullt in a very
thin film of lubricant.
This thin film dries to a soft, varnish-like finish that really
adheres to the bullt. Additionally, the dried coating will not
affect powder.
Easy to apply and eliminates the need for sizing of most cast bullts.
While it works well with all cast bullts, it works best with the
micro band bullts, which are designed for tumble lubing.
Material:
Alox
Quantity:
4 oz
Melting Point:
Unknown, already liquid
Container:
Plastic Bottle
Features:
1 bottle will coat 1,000 bullts
Notes:
Liquid Alox does not need to be heated to be applied.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We are a Factory Direct D
ealer of
Lee
®
Precision, Inc.
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are
BRAND
NEW
in the box; and contain all of the parts, materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within
ONE DAY!