KBIC-125 Motor Control with SI-5 Barrier terminal / isolator board KB Electronic

Description

KBIC-125 DC motor controller with SI-5 isolator board and hp resistor included. The Isolator board can be easily removed from the KBIC-125 if needed.
I have 20 of these drives contact me if you want more than 1, I also have a few different HP resistors let me know what you need and if I have one I'll include it with the drive.
The KBIC-125 is an adjustable speed DC Drive. It will control motors between 1/100-3/4 HP (1.5 HP w/aux. Heat-sink) by inserting the proper Plug-in Horsepower Resistor. The KBIC-125 motor speed control is designed for 90 VDC PM and Shunt motors. Speed range is 50:1 with load regulation of 1%. Features include Auto Inhibit, Voltage Following, MOV transient protection, 5K speed pot and trimpot adjustments for Min, Max, Accel, IR and CL.
The SI-5 Barrier Terminal Board Signal Isolators
convert standard KBIC
®
and KBMM™ controls to an
isolated input. The Isolators contain a selectable jumper
(J1) that allows for either a 0 – 5 or 0 – 10 VDC input signal.
By using external resistors, the input signal can be
changed to 0 – 100 VDC, 0 – 200 VDC and 4 – 20 mA.
The output voltage is 0 – 10 VDC which can be rescaled
via the built-in MIN and MAX trimpots. Selectable AC Line
jumpers (J2A, J2B) allow the SI-5 to be used
either with 115 or 230 VAC controls. In addition, a +12
VDC power supply voltage is furnished which can be
used to power remote transducers or provide an isolated
speed potentiometer. Installation is made by simply mating
the SI-5 with the KBIC
speed controls via the built-in quick-connect terminals.
Shipping by USPS only NO international shipping