High Speed DC 7-24V Brushless Hallless BLDC Controller w/ Potentiometer

Description

Store category
Sign Up Now !
You may also like
High Speed DC 7-24V Brushless Hallless BLDC Controller w/ Potentiometer
Product Description
Feature:
Note: This drive is a DC three-phase brushless Hallless control board. The motor can work normally even without Hall.
also please connect the wire correctly to avoid damage.
How it Work:
The standard speed control of the potentiometer does not require an external control signal. It increases clockwise and decreases counterclockwise.
Also applicable to external PLC 0-5 analog quantity control Unplug the potentiometer cable, external 0-5 analog quantity control signal and ground line, respectively connected with the brushless driver board input signal end, as long as the two lines are OK
Product Parameters:
Working voltage: 6.5-24V
Drive current: Rated 15A (if add fan for Cold 30A)
Maximum Speed: 224000 RPM (2-pole motor), 74000 RPM (6-pole motor), 40000 RPM (12-pole motor), 35000RPM (14-pole motor).
Notes:
The ESC is specially designed for the design of all kinds of industrial power tools such as air pump, water pump, oil pump and fan which use DC three-phase brushless motor. The default medium angle and long time high current work, Jianyi plus fan cold has overheat protection. The external heat dissipation condition of the ESC is poor, and the power is automatically reduced when the temperature exceeds 100 degrees. The temperature drops to 100 degrees and returns to normal.
Package include:
1x BLDC Speed Controller
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept paypal payment and only ship to the address on paypal payment (Gift address is OK!)
Payment via PayPal should be made within 7-15 business days after auction close. Otherwise, we will relist the item and report an Unpaid strike.
Delivery details
We ship worldwide (NO China) at flat rate ! This price is the same to all over the world. We wll check each item clearly before we sent it out.
All of our item shipment is Surface AIR MAIL have no track number, Item reach most countries within 16-20 days. (Actual transit time may vary and is best estimated but not guaran- teed.) ;if need track number need add 5 usd for the ship cost.
If you can't get the post after 30 days from the day we sent to you , please contact us directly . We would be with you to resolve the case. Please trust us, we will provide best service with honest attitude.
Please make sure your shipping Address is Correct. We only ship to the confirmed address provided by Paypal. Before you pay, please make sure your address in Paypal matches the address you would like us to ship to.
Buyers need to pay S&H again for reshipping the item (except the wrong buyer address is wrote by us).
We promise each item would be shipped, but sometimes less than 0.5% packages might be lost in the way, you could choose to let us send another same item again or ask for money back.
Shipping fee quotation for any other methods, EMS, UPS, DHL, Fedex is available on request.
Terms of sales
From:Magicmusical09
About us
If you have any question or problem about the item, you can contact us, We will response you within 24 hours;We pride ourselves on the best customer service possible, which is evident of our current eBay feedback rating. We look forward to serving you.
Contact us
If you have any question or problem about the item, please contact us .we will handle.
Feature: Note: This drive is a DC three-phase brushless Hallless control board. The motor can work normally even without Hall. also please connect the wire correctly to avoid damage. How it Work: The standard speed control of the potentiometer does not require an external control signal. It increases clockwise and decreases counterclockwise. Also applicable to external PLC 0-5 analog quantity control Unplug the potentiometer cable, external 0-5 analog quantity control signal and ground line, respectively connected with the brushless driver board input signal end, as long as the two lines are OK Product Parameters: Working voltage: 6.5-24V Drive current: Rated 15A (if add fan for Cold 30A) Maximum Speed: 224000 RPM (2-pole motor), 74000 RPM (6-pole motor), 40000 RPM (12-pole motor)