Bullet Slug Mold Svarog Botfly 12 gauge New

Description

Slug casting mold
Svarog Botfly
12
Quality:
Our company designs and produces premium slug mold.
Mold blocks are made from highest quality of  duralumin and stainless steel.
Mold is complete with sprue plate, hardwood handles and complete instruction .
A wide range of hunting and sporting Slug for 12 , 16 , 20 , 410 ga.
Description:
This mould produces quality Slugs that are designed for hunting large game,
with two cylindrical belts that create good a barrel centralisation and gas seal  allows this to be used in a rifled or unrifled barrel.
They are a truly effective, expansive, segmented, slug, that causes maximum internal destruction on impact and minimum over-penetration meaning impressive stopping power.
After hitting your quarry, The slug breaks into multiple pieces  providing a deep penetrating main body and 4  fragments that detach After contact and split from the main body (stopping anything )
It Can be loaded on a special wad or a Standard shotgun trap hull or with standard wad and gas seal.
which ever is use is fitted to the slug and remains attached after firing to give impressive stability during flight.
It is also possible to apply lubricant between the slug belts to reduce barrel slug friction, and even to powder coat them to get the perfect balance for your barrel.
(using the alternative "Monolith" inner mould pin) gives the ability to shoot target and practical shotgun.(available separately) or bought as a set with the 2 in 1 mould option.
Configuration:
12 GA
Hardwood
Handles
"Standard" core pin
Sprue plate
instruction
Branded box
Specifications:
12 GA
1 Cavity Mold
Belt diameter 18,5mm (.728.) (caliber)
Body 14,9mm (.551.) (caliber)
Weight Without wad 30 grams (463gr) 1,06 ounce.
Weight Without wad 33 grams (509gr) 1,16 ounce.
(dependent on type / mix of lead)
Segmented and Expansive.
*
The size and weight of the bullet depends on the quality of lead
Additional accessories can be purchased on our official website.