-40%
AC180V-260V Input DC180V Output 8A PWM DC Motor Speed Controller Driver HX-SXPWM
$ 32.09
- Description
- Size Guide
Description
HX-SXPWM-A AC180V-260V Input DC180V Output 8A PWM DC Motor Speed Controller DriverNote:
1. This product is a DC motor speed controller,
Only for DC motor speed control,(Can be customized DC 48V/90V/180V/220V Output)
2.
Please confirm that the rated current of your motor is less than 5A before ordering.Thanks!~
Working Environment:
1. ambient air temperature: -10 ~ 40 ° C
2. the air relative humidity of 85% or less, well-ventilated
3. installed in a well-ventilated, no severe impact, no vibration, no explosion hazardous media and no conductive metal powder occasions.
Features:
1. the input power (VAC): AC90-260V 50/60 Hz (Wide voltage range)
2
.
the output armature voltage range (VDC): 0-90V/110V/180V/220V (can be customized different versions)
3
.
the output armature current range (A): 8A (0.1A-10A can be arbitrarily set) If the current is too large need to increase the heat
4
.
the output excitation voltage range (VDC): 100V/200V (default full bridge rectifier, which is 0.9 times the input voltage)
5
.
the output excitation current range (A): 1A
6
.
the operating frequency: 16 KHz
7
.
the given signal mode (V / mA): the default potentiometer, 0-5V, 0-10V, 4-20mA, PWM, button type
8
.
enable control mode (EN): switch
9
.
soft start (acceleration time adjustment range) (S): 0-10S (default3 seconds)
10
.
soft stop (deceleration time adjustment range) (S): 0-10S (default 3 seconds)
11
.
double closed-loop PI regulation, (voltage, current) control more reliable
12
.
IR torque compensation range: 0-100% (default 0)
13
.
over-current protection range: 0-set value (default 8A)
14
.
over-current protection: stop the output and instructions (display code E1)
15
.
short-circuit protection: stop the output and instructions (display code E0)
16
.
overheating protection: power tube temperature exceeds 100 ° turn off the output and instructions (display code E2)
17
.
built-in digital display module, can display real-time operating voltage and current
18
.
Dimensions: length 159mm × width 98mm × height 38mm
19
.
wiring: terminal type (convenient)
1
.
the use of pulse width technology to make the speed more stable, low-speed efforts
2
.
with short circuit, over current, over-temperature protection cut-off device to make the performance more reliable
3
.
with soft-start device to eliminate the motor starting current is too large
4
.
high and low voltage signal completely isolated, the use of more secure
Precautions:
1
.
the governor closed the input power,
Touched by hand within a minute ban high-voltage terminal,
There are high-voltage capacitors,
To prevent electric shock!!!
2
.
for the two lines of DC permanent magnet motor,
Two lead wires connected directly to the armature M + with M-.
Prohibit access exciting!
Instruction manual:
PWM signal requirements:
1
.
the default PWM signal level is 5V, the signal frequency 1KHZ above, with a load capacity of more than 0.5MA.
2
.
5V level without string resistance Input at PWM port,
10V level PWM input from 0-10V port or string 10K resistor at PWM port input,
12V level string 3.9K resistor from 0-10V port input or string 13.7K resistor In the PWM port input,
24V level string 16.8K resistor from 0-10V port input or string 27K resistor in the PWM port input.
Package:
1pc HX-SXPWM-A AC90V-260V Input DC1
8
0V Output 8A DC Motor Speed Controller Driver
Payment Method:
PayPal preferred
Shippment:
1.We provide free shipping to international via China Post Airmail . We can also ship by TNT/EMS/DHL/FedEx for alternative shipping method for corresponding fees. Please let us know before payment if you need split shipment.
2.International shipping requires complicated shipping procedures, If you have not received your shipment within 30 days from payment, please contact us.
Returns & Replacements & Repair:
We accept returns & replacements within 30 days from the day the customer receive the products, please make first contact within 30 days from receiving the order. Products should be returned in original condition. As a benefit to our customers, we also provide repair within 3 months from the day when this item is shipped out, after repair is done, we will send you the item, but the customer should pay both shipping ways.
Feedback:
1)Your Feedback is really important to us, please take a few seconds to leave great feedback if you are satisfied with our product or service, thank you so much!
2)We always offer the lowest price for best goods and service to you.
3) Please contact us before leaving neutral(3 stars) or negative(1-2 stars) feedback.We will try our best to solve the problem and leave you a happy shopping mood here. Thank you!