1PCS Speed RPM Stepper Servo Motor Driver Controller Speed Adjustable Reversal

Description

1PCS Speed RPM Stepper Servo Motor Driver Controller Speed Adjustable Reversal
CS10-3 pulse generator can control stepper motor, servo motor, motor speed 0 0-1000 rpm, square wave, stepless adjustable. External
Start and stop, direction can achieve external control. With speed regulation and fixed length function
.
Instructions
1. Display description: In the running state or stop state, the digital tube displays the current speed value in units of rpm.
Display the parameter code or parameter value of the setting in the setting status
2. Parameter setting: press and hold, press and hold
Key, ACC appears, press again
Key appears ACC parameter value, press
with
Key modification, modify the press
Confirm, return to ACC status, press
key
The tAb appears, press Modo again, then click to display Model, then press to return to ACC parameter setting with ACC, press
Key exit
The parameter is set to the stop state.
ACC acceleration setting (1-99)1 fastest, 99 fastest, load reset slower, default value 5
tAb Subdivision number setting (1-64) This value is set according to the drive and should be set to the same as the drive.
Speed, default value 10.
Run
When (0-1) is set to 0, the power-on is stopped. When set to 1, it will run when powered on. The default value is 0.
IN-S operation stop input setting
Default 0
0 Terminal 3 Turn on and start, open and stop, direction is terminal 4 Turn forward, reverse
1 Terminal 3 Press once to start, press again to stop, direction is terminal 4 Press to stop
2 Terminal 3 Press once to start, terminal 4 to stop
3 Terminal block 3 Press forward to start, press again to stop, press the line end 4 Press reverse to start, then press to stop
4 Terminal 3 Turn on forward rotation start, disconnect stop, terminal 4 turn on reverse start, stop and stop
Mode operation mode setting
(0-3)0 speed control, 1 fixed length control, 2 continuous control, 3 round trip control, default value 0
In fixed length mode, stop state press the stop button to set P-01, long press the stop button is d1A, d1b
In continuous mode and round-trip mode, stop state and press the stop button to set P-01, P-02, P-03
In the speed control mode and the round-trip mode, the X1 and X2 limits are valid, and the reverse direction is encountered.
P-01 Length value, number of pulses = P-01*d1A/d1b doub: Magnification setting Default 1 0-1000 rpm adjustable
P-02 delay value, in milliseconds, set to 2 0-2000 rpm adjustable
P-03 times value, continuous running times value is set to 3 0-3000 rpm adjustable
3. Operation description: The panel is started or the external terminal is activated. Adjust the potentiometer to adjust the speed during operation.
The panel stops or the external terminal stops. When it stops, it displays 0. If it is stopped, it needs to display the current adjusted speed of the potentiometer.
You can press the offline button. When the offline light is on, adjust the potentiometer to change the direction of the speed value in the stop state. Press the panel direction key or
External direction key
Payment
Returns
Shipping
Payment
We only accept payment through Paypal.
Items will go to post within 1-2 business days after payment confirmed.
Returns
If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.
Shipping
1. We ship to Worldwide.
2. We only ship to confirmed PAYPAL address; your PAYPAL address must match your Shipping address.
3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee.
4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays.
5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service.
6. If you have any problem, please contact us via message, we will reply message within 1-2 working days, please wait for patient.