0~100% Digital PWM Motor Speed Controller DC 12V 24V 36V 48V Reversible 40A US

Description

Product Description
Features
Intelligent dual mode manual Fully automatic two modes are available
LCD screen with backlight capable of displaying working time speed percentage current mode forward rotation reverse state
Slow start and slow down time can be set with speed upper limit lower limit setting
Tact switch to switch forward and reverse jog acceleration and deceleration solves the problem of traditional potentiometer
Can set working time, time to point stop
Product parameters
Product Name: LO68
Input voltage: DC10-55V
Output voltage: linear under load
Instantaneous current: 60A
Continuous current: 40A
Speed control type: adjust current
Adjustment speed control mode: jog + -
Speed range: 0 - 100%
Control frequency: 15KHZ
Wiring type: fence terminal block
Support motor: brush motor
Speed digital display: percentage 0-100%
Module size: 125mm * 76mm * 27mm / 4.92in * 3in * 1.06in
Panel opening:119mm * 70mm / 4.7in * 2.75in
0-1-2-3-4-5-6-7-8-9 function settings are as follows
Manual automatic mode selection Function 0: 1 is manual mode 2 is automatic mode The default is 1 manual mode.
Slow start time setting Function 1: 000 - 100 Slow start to 100% speed time is adjustable between 0-10 seconds The default is 1 second.
Slow stop time setting Function 2: 000 - 100 The slow stop time is adjustable between 0-10 seconds. The default is 1 second.
Lower speed limit setting Function 3: 000 - 080 The minimum speed is adjustable between 0-80% and less than the maximum speed setting. The default is 0.
Speed upper limit setting Function 4: 000 - 100 The maximum speed is adjustable between 0-100% and is greater than the minimum speed setting. The default is 100%.
Acceleration and deceleration value setting Function 5: 001 002 005 010 015 020 020 025 Each press of the addition and subtraction key speed changes by 1%, 2%, 5%, 10%, 15%, 20%, 25%.
Motor running total time setting Function 6: 1 second minimum - 99 hours 59 minutes 59 seconds maximum The default is 99 hours 59 minutes 59 seconds.
The following function 7.8.9. is the time setting in the fully automatic mode.
Forward time setting Function 7: 1 second minimum - 99 hours maximum Default is 10 seconds
Stop time setting Function 8: 1 second minimum - 99 hours maximum Default is 10 seconds
Reverse time setting Function 9: 1 second minimum - 99 hours maximum Default is 10 seconds
Note Input must be divided into positive and negative input voltage should be equal to the rated voltage of the motor (within 10-55V)
If you need more detailed instructions, please contact us.
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3mm error due to manual measurement.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 * Digital 0~100% DC Motor Speed Controller
Payment
1
.
We accept Paypal only.
2
. We only ship to your Paypal's address, please ensure your shipping address on your paypal account is correct. If you have any change for address, please inform us in ebay note.
3
. Payment must be fulfilled within 7 days after purchase. All non-paying orders will receive an unpaid reminder from eBay.
Shipping
Once we have received cleared full payment, your items will be dispatched in 1-3 days.
It normally takes :
5-10 business days
for US
if your shipment delays, we hope you can be patient, please don't open dispute and at the same time contact us, we will try our best to help you.
In addition, we have 2 warehouses in the United States. We will delivery the items according to the order address and our inventory in each warehouse.
Returns
If you have any questions about the product, please Email us or Leave a message，We will reply
as soon as possible . Thanks for cooperation and understand！！！
Usually，
if any item is defective upon receipt or do not work, please contact us for the return address, return is accepted within 30 days after the buyer receiving the item.
Returned item has to be in its original condition，
But Buyer is responsible for return shipping costs
. After receiving the return we will make a replacement depends on our available stock, if not available, a refund will be issued.
Feedback
1. In order to provide you the best service please treat the transaction fairly.
B
efore you leave a neutral or negative feedback, please DO contact us to get a better solution
,
Because we don't want to get a NEUTRUAL feedback or NEGATIVE feedback . Tks for your understand
2. If you are satisfied with our products and service, please help to leave "Positive Feedback" and "5 Perfect Stars”,for us when you receive your items and we will do the same for you. Thanks in advance!
3. If you have any questions regarding the transaction, before leaving any feedbacks, please contact us and give us an opportunity to find a solution. Thank you!
powered by